Open Site Navigation

Maintenance

Check the 4 bolts on the headcap are tight and haven't worked loose

1

2

Check that the trigger is working freely

3

Check there are no cracks or damage to the body of the tool

4

Check that the contact arm is moving freely

MAKE SURE THERE ARE NO NAILS WITHIN THE MAGAZINE AND THE AIRLINE IS DISCONNECTED BEFORE PUTTING YOU HAND NEAR THE NOSE

5

Check you air connectors and airlines for leaks and that it is correctly attached to the tool

6

Only use airline oil to lubricate the tool. Don't use WD-40 or another detergents as this can perish components within

7

Make sure the tool is lubricated before use. Use 2-3 drops before every shift

8

Check that the magazine is free of damage and in good working order

9

Where fitted, make sure the debris guard is fitted correctly and free of damage